To flash your Hitech S230, you need to download the Hitech S230 stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Hitech S230.
Please note that flashing this Stock ROM Firmware on your Hitech S230 will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files including contacts, messages, call logs among others.
Note: If your S230 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Hitech S230 Stock ROM Firmware Download Link(s)
1. Hitech S230 (SW05 2014-05-20 V100 R17680 AfterSales) Stock Firmware
How to Flash Stock Firmware On Hitech S230
1. Download your Hitech S230 stock ROM firmware from the link above.
2. Extract the Hitech S230 Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD device drivers for WIndows PC from here
4. Now, choose either of the tools listed below here to load the stock firmware on your Hitech S230.
-
1. Miracle Box
2. Research Download Tool
3. Piranha Box - recommended!
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Hitech S230.
2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Hitech S230, if need be.
 Download){kind=link}
0 Comments