Hisense E71-T Stock firmware which I have attached here is Hisense E71-T stock ROM firmware which can be used to flash stock firmware on Hisense E71-T using any compatible flash tool. To use this Hisense E71-T flash file, you need to use a service tool that can flash stock ROM of this stock firmware file format.
In the paragraphs that follow below here, you will be able to download your Hisense E71-T stock ROM then step by step guides on how to flash the Hisense E71-T stock firmware on your Hisense E71-T device using the Hisense E71-T flash file you have just downloaded shall follow.
NOTE:
1. I will only give detailed tutorial using one of the many tools that can flash Hisense E71-T stock firmware on your Hisense E71-T, then reference other MTK service tools that can flash the same Hisense E71-T stock ROM format.
2. Before you attempt to use this Hisense E71-T flash file, ensure that the Hisense E71-T stock firmware is exactly for your Hisense E71-T hence, the slightest difference may cause serious damage.
3. While comparing the stock firmware, your Hisense E71-T installed android OS version doesn't really matter.
4. Proceed to following the step by step guide on how to flash stock firmware on your Hisense E71-T device with caution.
5. Lastly, pay attention to every detail.
Hisense E71-T Stock Firmware Download Link
Hisense E71-T Stock ROM Flash File Download Link
For Hisense E71-T Stock Firmware and all other Hisense Stock ROM see here: All Hisense Stock ROM Firmware List Here
How to Flash Stock Firmware On Hisense E71-T Using QPST QFIL Tool
1. Download and install QPST on your PC. You can download QPST from here.
2. Download Qualcomm android device drivers. If your device has been bricked; either that it displays QHUSB_BULK 9008, QHUSB_BULK PID_9008, QHSUSB_BULK 9006, CS Emergency or any other similar message in Device Manager when it is connected to PC, it is necessary that you install Qualcomm HS-USB Drivers on your PC. You can download HS-USB Drivers from here.
3. Download the Stock Firmware for your Qualcomm android device. NOTE: QPST QFIL can flash .mbn and .bin files with .xml file map only.
For LG Android Device Users, see: How to Convert .KDZ Files to .MBN and .BIN Files
4. If the firmware you downloaded is compressed in a .zip or .rar file, decompress / unzip the firmware you downloaded in a folder on your PC.
5. Now, remove battery from your phone. If the phone battery is sealed (not removeable) power off the phone and connect your phone to the PC using its compatible USB Cable.
6. Now, launch/open QFIL by i- go to Local Disk C:/ >> Program Files >> Qualcomm >> QPST >> bin >> QFIL.exe and open QFIL.exe as Admin, ii- Click iCon >> All Programs >> QPST >> QFIL and launch / open it.
7. When QFIL is launched, it should display your connected phone's mode and its COM port.
8. On QFIL, locate Programmer Path and click Browse, navigate to the folder where you have UNZIPPED your phone's firmware and select the eMMC programmer file. It should be like prog_emmc_firehose_8E71-T0.mbn or something similar.
9. Locate Load XML and click it. QFIL will automatically open your firmware folder. If it doesn't, navigate to the firmware folder and select rawprogram0.xml then select patch0.xml.
10. Finally, locate Download and click it. If all the configurations are correct, QFIL will begin writting / loading the selected stock firmware partitions on your phone.
In less than 5 minutes, the flashing operation should have completed. When it does, your phone should reboot by itself and if it doesn't, disconnect it from the PC and reboot the phone.
Other Tools that Can Flash Hisense E71-T Stock Firmware
1. Tool Studio eMMC Download Tool Tutorial
2. GNQC Tutorial
){kind=link}
Before you go, read these: