This is an Unbrick Project page for LG V10 H961S devices. Using the files provided here and the tutorials, you should be able to unbrick either your soft bricked or hard bricked LG V10 H961S.
$17.99This LG V10 H961S Unbrick Project is maintained by ArykTECH - thanks to our sponsor(s)
Have a device you want us open Unbrick Project for? Open Unbrick Project Here
| Project Intro | Project Files Access |
| Solutions: QFIL Method | Solutions: Loader Method |
Intro to LG V10 H961S Unbrick Solutions (Project)
For those looking to unbrick / debrick their LG V10 H961S that has being lying dead, useless for days, you may now unbrick your device following the detailed instructions provided on this page - of course, you need to download the LG V10 H961S specific unbrick files which include the LG V10 H961S QFIL firmware containing rawprogram0.xml and firehose files specific for LG V10 H961S.
Although we have put to table, the LG V10 H961S debrick / unbrick solutions, to gain access to this device unbrick project folders and download the files necessary to recover and unbrick your H961S, you need to subscribe to this unbrick project. You can Subscribe Here
See also:
| Targeted Device(s): | LG V10 H961S Variants |
| Initial Sponsor(s) | George, Mikail |
| Devs/Maintainer(s) | U_John (john@devs.aryk.store), Arewa (arewa@devs.aryk.store) |
| Project Status | Ready. Working |
| Project Progress | We have: |
| Method(s) Deployed: |
This LG V10 H961S Unbrick Solutions Can Recover Devices that Are:
1. LG V10 that's stuck at HS-USB QDLoader 9008.
2. Those with Blank screen and in emergency diag mode.
3. Those LG V10 with verification failure issues.
4. Some LG V10 that hangs booting or ends up in incessant reboots.
5. LG V10 H961S boot Certification Verify errors.
How to Unbrick (Debrick) LG V10 H961S
On this page, we give you instructional tutorials for methods deployed, that which include the QFIL and Loader methods of unbricking LG V10 H961S.
In the paragraphs that follow below here, we explain how to unbrick your LG V10 H961S device using either QFIL or the Loader method.
How to Unbrick (Debrick) LG V10 H961S Using QFIL QPST
1. Download the contents of the QFIL Folder from the LG V10 H961S Unbrick Project Folder and Extract them onto a folder on your PC.
2. Download HS-USB QDLoader Drivers here and install it on your PC.
3. Open the LG V10 H961S QFIL Files folder on your PC to view its content.
4. Launch (Open) QFIL on your PC. You may download latest QPST from here if not installed on your PC yet.
5. Now, on QFIL, choose Flat Build and for programmer choose the firehose file seen in the QFIL Files folder you opened in Step 3 above.
6. Click Load XML and choose V10 H961S rawprogam0.xml and patch0.xml files both in the QFIL Files folder in which the Firehose file is located.
7. Finally, click Download. QFIL should successfully download the files on your LG V10 H961S.
Once QFIL has successfully downloaded the files, your LG V10 H961S should reboot automatically. Note that first boot may take up to 15 minutes to complete!
If you have any issue using QFIL, contact us here - project subscribers only!
How to Unbrick (Debrick) LG V10 H961S Using Loader File / SD Card
1. From the LG V10 H961S Unbrick Project Folder, download the loader file and extract it onto a folder on your PC.
2. Now, format your SD Card. exFAT is preferred.
3. Download DiskImageRev2 from here and extract it onto a folder on your PC then, open it.
4. Slot your SD Card in a card reader and connect it to your PC.
5. Launch DiskImageRev2 on your PC - as Admin preferably.
6. On launch, DiskImageRev2 should detect and display the drive where your SD Card is connected. If otherwise, browse to select the correct drive.
7. From DiskImageRev2, browse to the folder where you saved / copied the LG V10 H961S Loader.img file on your PC and select it.
8. Now, click Write and wait until DiskImageRev2 completes the process.
9. Once DiskImageRev2 has successfully written the files on the SD Card, your SD Card is now bootable! You may now insert it on your LG V10 H961S and boot the device using its bootloader key combo.
-
Brief Note:
The Loader method requires a full ROM Dump also known as a full blk0 backup of a working LG V10 H961S correctly flashed or written on a pretty good and fast class 10 SD Card.
0 Comments