QDLoader HS-USB Driver is usually needed when you need to unbrick your Qualcomm android devices especially, when your Qualcomm android device is stuck at either old QHSUSB_BULK 9008, QHUSB_BULK 9006 or new ones including QHUSB_BULK 9008, QHUSB_BULK PID_9008 and QHSUSB_BULK 9006 and other brick states.
QDLoader HS-USB Driver Download Links:
1. QDLoader 64bit2. QDLoader 32bit
How to Install QDLoader HS-USB Driver On your PC
1. Download QDLoader HS-USB Driver appropriate for your PC from the link above.2. The setup is compressed in a zip folder. Decompress/unzip it onto a folder on your PC to loacte the setup file.
3. Double-click the setup file to launch Windows install wizard.
4. Follow the unscreen instructions by the InstallSheild Wizard until the installation complete.
5. You may now connect your Qualcomm powered devices and wait while Windows detects and installs the drivers.
Recommended:
6 Comments
Hello I am having Sahara Errors
ReplyDeleteerror: function: sahara_rx_data:194 unable to read packet header only reads 0 bytes
error: function: sahara_main:854 Sahara protocol error
error: main:256 uploading image using Sahara protocol failed
Download Fail:QSaharaServer Fail:Process fail
I followed all your instructions any help appreciated
H631 Unbrick
Also was I suppose to get the Loader Image in the folder I purchased
Thanks
Since you are a subscribed member, please use the IM Channel on our Contact Page here for real-time one-on-one guides. If need be, we may also use Teamviewer.
DeleteHI , I have a V10 under the barrery h901 but in mother board it's vs990 , The phone bricked (no down mode , wont turn on ) when i try to update to 7.0 using lgup , any sollution !
ReplyDeleteYes. Your device unbrick solution is here: How to Unbrick LG V10 - All Variants
Deleteis there any chances to unbrick Sony X performance?? Bricked while flashing wrong rom
ReplyDeleteMaybe. Can you supply detailed instruction?
Delete