Hitech S100 Stock Firmware (Flash File) Download

If you notice any software malfunctions with your Hitech S100 android device, you're most likely required to download and flash stock ROM firmware on your S100 to permanently correct the software errors you noticed on your Hitech S100. And when you load stock firmware on your Hitech S100 using any Qualcomm flash tool, your Hitech S100 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Hitech S100 Stock ROM Firmware Download Link(s)

1. Hitech S100 (2012-12-17 2151260 Q105_Hitech_E1_V0.1.5_S1106) Stock ROM

How to Flash Stock Firmware On Hitech S100

1. Download your Hitech S100 stock ROM firmware from the link above.

2. Extract the Hitech S100 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Hitech S100.

1. Tool Studio eMMC Download Tool

2. QPST QFIL Qualcomm Flash Tool

3. GNQC Qualcomm Flash Image Loader

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Hitech S100.

2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Hitech S100, if need be.